De-lock Navilock NL-8002U USB 2.0 Multi GNSS Receiver u-blox 8 1.5 m

Navilock NL-8002U USB 2.0 Multi GNSS Receiver u-blox 8 UBX-M8030-KT chipset, 1.5 m, black

The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.

. Connector: USB 2.0 type A male
. u-blox 8 UBX-M8030-KT chipset
. Frequency:
  GPS: L1, 1575.4200 MHz
  GLONASS: L1, 1602 (k x 0,5625) MHz
  BEIDOU COMPASS: B1, 1561.0980 MHz
  GALILEO E1, 1575.4200 MHz
  QZSS L1, 1575.4200 MHz
. Accepts the signals of up to 72 satellites at the same time
. Supports AssistNow online/offline,
  SBAS (WAAS, EGNOS, QZSS and MSAS)
. Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
. USB specification 2.0
. Auto Baud Rate up to 115200 bps
. Update rate:
  single GNSS: 18 Hz (e.g. GPS solo)
  multi GNSS: 10 Hz (e.g. GPS+GLONASS)
. Sensibility max. -167 dBm
. IPX6 protection class
. Magnetic, non-slip on the bottom
. LED-indicator for GPS-status
. Operating temperature: -20 °C ~ 60 °C
. Power supply: 5 Volt
. Current consumption: max. 45 mA
. Cold start in ca. 26 seconds
. Hot start in ca. 1 second
. Positioning accuracy: 2.5 m CEP (Circular Error Probable) and
  2 m CEP with SBAS
. Cable length: ca. 1.5 m

System requirements
. Windows Vista/7/8/8.1/10, Linux Kernel 2.6
. PC or laptop with a free USB port
. For devices with OTG function and optional OTG adapter: Windows 10

Package content
. USB 2.0 receiver
. Driver CD
. User manual on CD ROM

Dimensions (LxWxH): 65x45x22 mm